← Sterling Academy
Glossary
ISO, GRC and compliance terms, in plain words
152 terms used in management systems, auditing, information security, data protection, GMP, food safety, laboratories and AI governance. Each definition is written by the Sterling expert panel in plain words, says why the term matters at work, and links to the courses that teach it.
8
- 8D problem solving Quality
- Eight disciplines: a team-based method for solving significant product or process problems. It covers forming a team, describing the problem, containing it, finding the root cause, choosing and verifying permanent corrective actions, implementing them, preventing recurrence elsewhere and recognising the team.
A
- Accreditation body Certification
- An authoritative body, often national, that formally assesses and recognises the competence and impartiality of certification bodies, laboratories and inspection bodies against international standards. It does not certify the organisations that those bodies audit or test. Accreditation is granted for a defined scope and reassessed at intervals.
- AI literacy AI governance
- The skills, knowledge and understanding that let people use AI systems in an informed way and recognise the opportunities, risks and possible harm of AI. Under the EU AI Act, organisations that provide or use AI systems must take measures to support it among their staff.
- AI management system AI governance
- A management system for the responsible development, provision or use of AI systems. ISO/IEC 42001 sets out its requirements, covering AI policy, roles, AI risk and impact assessment, controls across the AI life cycle, data, third parties, monitoring and continual improvement.
- AI system AI governance
- Under the EU AI Act, a machine-based system designed to operate with varying levels of autonomy that may adapt after deployment, and that infers from its inputs how to generate outputs such as predictions, content, recommendations or decisions that can influence physical or virtual environments.
- AI system impact assessment AI governance
- A documented assessment of the potential consequences of an AI system for individuals, groups and society, considering its intended use and foreseeable misuse. ISO/IEC 42001 requires it, and ISO/IEC 42005 gives guidance on how to carry it out. It is repeated when the system or its use changes significantly.
- ALCOA+ GMP and data integrity
- A set of principles for trustworthy data in regulated work. Data should be attributable, legible, contemporaneous, original and accurate, and also complete, consistent, enduring and available. Inspectors use these principles to judge whether paper and electronic records can be relied on to support decisions about product quality.
- Annex A Information security
- The annex of ISO/IEC 27001 that lists the reference set of information security controls, grouped into organisational, people, physical and technological themes. Organisations compare their chosen controls against it to make sure nothing necessary has been overlooked, and record the result in the Statement of Applicability.
- Annual product quality review (APQR) GMP
- A regular, normally annual, review of each medicine's quality data to confirm the process is consistent and to identify improvements. It covers batches made, test results and trends, deviations, changes, complaints, recalls, returns, stability data and the effectiveness of corrective actions.
- APQP Automotive
- Advanced product quality planning: a structured framework used in the automotive industry to plan and deliver a new or changed product that meets customer requirements. It runs from planning and design through process development, validation and start of series production, with defined outputs at each phase.
- Audit criteria Auditing
- The set of requirements an audit compares evidence against. Criteria can include a standard, the organisation's own policies and procedures, contracts, customer requirements and applicable laws. Agreeing them before the audit makes it clear what every finding will be measured against.
- Audit evidence Auditing
- Records, statements of fact and other information that are relevant to the audit criteria and can be verified. Auditors gather it by interviewing people, observing activities and reviewing documents and records, usually by sampling, and use it as the basis for every finding and conclusion.
- Audit finding Auditing
- The result of comparing collected audit evidence with the audit criteria. A finding can show conformity or nonconformity, and can also identify a risk or an opportunity for improvement. Each finding should state the requirement, the evidence and what was found clearly enough for the auditee to act.
- Audit plan Auditing
- The description of the activities and arrangements for a single audit. It sets out the objectives, scope, criteria, dates, locations, audit team, the processes or areas to be visited and a timetable, and is shared with the auditee in advance so the right people and records are available.
- Audit programme Auditing
- The plan for all the audits an organisation will carry out over a period, usually a year. It sets which processes, sites or areas will be audited, when, by whom, against which criteria and in how much depth, based on their importance, their risks and the results of earlier audits.
- Audit scope Auditing
- The extent and boundaries of a single audit: which sites, processes, departments, activities, shifts and time period it covers. It is defined in the audit plan, and the audit conclusion only applies to what was within that scope. It also states any areas deliberately left out.
- Audit trail GMP and data integrity
- A secure, computer-generated, time-stamped record that shows who created, changed or deleted electronic data, when, and, where required, why. It allows the history of a record to be reconstructed without obscuring the original values. It is a core control for electronic records in regulated laboratories and production areas.
- Awareness Management systems
- What every person working under an organisation's control must understand about its management system: the policy, the objectives that apply to them, how their work contributes, and what happens if they do not follow the system. It is narrower than competence.
B
- Batch record GMP
- The record prepared for each batch of a medicine that documents its full production and control history. It includes a checked copy of the master record, materials and equipment used, each significant step with dates and signatures, in-process and laboratory results, yields, labelling and any deviations.
- Business associate Data protection
- Under HIPAA, a person or organisation, other than a member of the workforce, that creates, receives, maintains or sends protected health information on behalf of a covered entity, or provides services such as billing, claims processing, IT or consulting that involve such information. Subcontractors handling the information are also business associates.
- Business continuity exercise Business continuity
- A planned activity that practises, tests or evaluates business continuity plans and the people who use them. Formats range from discussion-based tabletop exercises through simulations and functional tests to full live exercises, each with objectives and a post-exercise report. Findings are used to improve the plans.
- Business continuity plan Business continuity
- Documented information that guides an organisation in responding to a disruption and resuming, recovering and restoring its activities. It sets out roles, communication, actions, resources and priorities so that critical products and services continue at an acceptable level. It is kept current and accessible during an incident.
- Business impact analysis Business continuity
- A structured assessment of what happens to the organisation over time if an activity is disrupted. It identifies the impacts on customers, finances, legal duties and reputation, and is used to decide which activities must be recovered first, how quickly, and with which people, systems, suppliers and other resources.
C
- CAPA Quality
- Short for corrective and preventive action: the process of finding the root cause of a problem, acting to stop it happening again, and checking that the action worked. Regulators and auditors judge a quality system largely by how well its CAPA process works.
- CAPA effectiveness check GMP
- A planned verification, carried out after corrective and preventive actions are completed, that shows with data whether the actions achieved their objective. Criteria, such as no recurrence across a set number of batches, are defined when the action is approved, not decided afterwards.
- Cardholder data Information security
- In PCI DSS, at a minimum the full primary account number (PAN) of a payment card, and also the cardholder name, expiration date and service code when they appear with the full PAN. It is distinct from sensitive authentication data, which includes security codes and PINs.
- Cardholder data environment (CDE) Information security
- In PCI DSS, the people, processes and system components that store, process or transmit payment card account data, plus any system components with unrestricted connectivity to them. It defines where the full set of PCI DSS requirements applies, so reducing its size reduces assessment effort.
- Certification audit Certification
- The initial audit a certification body carries out to decide whether to grant certification. For management systems it is normally done in two stages: the first reviews readiness, documents and planning; the second checks on site that the system is implemented and effective.
- Certification body Certification
- An independent organisation that audits a management system, product or person against a standard and issues a certificate if the requirements are met. Its credibility usually depends on accreditation by a recognised accreditation body for the relevant scope. Consultants and trainers do not issue certification.
- cGMP GMP
- Current good manufacturing practice: the minimum requirements for the methods, facilities and controls used to make, process, pack and hold medicines so they have the identity, strength, quality and purity they claim. The word current means firms are expected to use up-to-date systems and technology, not only what was acceptable years ago.
- Change control GMP
- A formal process for proposing, assessing, approving, implementing and reviewing changes that could affect product quality, validated status or regulatory filings. Changes to equipment, materials, processes, methods, systems, suppliers or facilities are assessed for risk before they are made. The quality unit approves each change.
- Cleaning validation GMP
- Documented evidence that a cleaning procedure consistently removes product residues, cleaning agents and microbial contamination from equipment to predefined acceptable levels. Limits are based on toxicological data, and sampling methods such as swabs or rinses are validated. It is reviewed when products, equipment or cleaning agents change.
- Competence Management systems
- The ability to apply knowledge and skills to achieve intended results. Management system standards expect organisations to decide what competence each role affecting performance needs, make sure people have it through education, training or experience, act to close any gaps, and keep evidence that those actions worked.
- Compliance evaluation Management systems
- A periodic check of whether the organisation is actually meeting each of its legal and other obligations, for example by reviewing permits, monitoring results, inspection reports and records against the requirements. Results, and any shortfall found, are recorded and acted on.
- Compliance obligation Management systems
- A requirement an organisation must meet, or has chosen to meet. Mandatory obligations come from laws, regulations, permits and licences; voluntary ones come from contracts, industry codes, customer requirements and commitments the organisation has signed up to. Together they form the organisation's legal and other requirements.
- Computer system validation GMP and data integrity
- Documented evidence that a computerised system used in regulated work does what it is intended to do, consistently and reliably, and protects data integrity. The effort is scaled to the risk the system poses to patient safety, product quality and data, often following the GAMP 5 approach.
- Contamination control strategy (CCS) GMP
- A planned set of controls for microorganisms, endotoxins or pyrogens and particles, based on current product and process understanding, that assures process performance and product quality. EU GMP Annex 1 expects sterile manufacturers to apply one across the facility and to review it periodically.
- Context of the organisation Management systems
- The internal and external issues that affect an organisation's purpose and its ability to achieve the intended results of its management system. External issues include markets, law, technology and climate; internal ones include culture, capability, resources and systems. These issues are reviewed as they change.
- Continual improvement Management systems
- Ongoing activity to make the management system and its results better over time. It draws on audit findings, data analysis, corrective actions, customer feedback, innovation and management review decisions, and can range from small step changes to major redesigns of processes or products.
- Control of nonconforming output Quality
- The arrangements that stop products or services that do not meet requirements from being used or delivered by mistake. They include identifying and segregating the output, correcting it, informing the customer, obtaining a concession, or scrapping it, with a record of the decision and who authorised it.
- Control plan Automotive
- A document that describes the controls applied to a product and its manufacturing process at each step: characteristics to be controlled, specifications, measurement methods, sample sizes and frequencies, control methods and the reaction plan if something goes wrong. It is linked to the process flow and FMEA.
- Correction Quality
- Immediate action to put right a detected nonconformity, such as reworking a part, repairing a record, segregating product or retraining one operator. A correction deals with the problem that has occurred but does not remove its cause, which is the role of corrective action.
- Corrective action Quality
- Action taken to remove the cause of a nonconformity so that it does not happen again. It differs from a correction, which only fixes the problem that occurred. Corrective action follows an investigation into why the problem happened and is proportionate to the effects the problem had or could have.
- Corrective action effectiveness Quality
- Whether a corrective action actually stopped the nonconformity from happening again. It is judged after the action has had time to work, using evidence such as repeat occurrence data, audit results, trend charts or test results, rather than simply confirming that the planned task was completed.
- Covered entity Data protection
- Under HIPAA, a health plan, a health care clearinghouse, or a health care provider that sends health information electronically in connection with certain standard transactions, such as billing. Covered entities must comply directly with the HIPAA rules. Many hospitals, clinics, insurers and pharmacies fall within this definition.
- Critical control point Food safety
- A step in a food process where control can be applied and is essential to prevent, remove or reduce a food safety hazard to an acceptable level. Each one has critical limits, monitoring and corrective actions in the HACCP plan.
- Critical limit Food safety
- A measurable value that separates acceptable from unacceptable at a critical control point, such as a minimum cooking temperature and time, a maximum pH or a metal detector sensitivity. If monitoring shows a limit is not met, product is treated as potentially unsafe.
- Customer complaint Quality
- An expression of dissatisfaction made to an organisation about its products, services or complaint-handling process, where a response or resolution is expected. Complaints can arrive by any channel, and are recorded, acknowledged, investigated and closed with feedback to the person who raised them.
- Customer-specific requirements Automotive
- Additional requirements an automotive customer adds to IATF 16949 and the core tools, covering topics such as PPAP, capability targets, problem-solving formats, warranty handling and supplier portals. Suppliers must identify, understand and meet the requirements of each customer they supply.
D
- Data controller Data protection
- Under the GDPR, the person, company, public authority or other body that, alone or jointly with others, decides why and how personal data is processed. The controller carries primary responsibility for compliance, including choosing processors that offer sufficient guarantees. Where purposes and means are set by law, the law may name the controller.
- Data integrity GMP and data integrity
- The degree to which data is complete, consistent and accurate throughout its life cycle, from creation through processing, review, reporting, archiving and destruction. In regulated work, trustworthy data should be attributable, legible, recorded at the time, original or a true copy, and accurate.
- Data processor Data protection
- Under the GDPR, a person, company, public authority or other body that processes personal data on behalf of a controller and only on the controller's documented instructions. Typical processors include cloud providers, payroll services, call centres and BPOs handling customer data for clients.
- Data protection impact assessment Data protection
- An assessment carried out before processing personal data in a way likely to result in a high risk to people's rights. It describes the planned processing, assesses whether it is necessary and proportionate, evaluates the risks to the people concerned, and sets out the measures to address them.
- Data protection officer (DPO) Data protection
- A person designated to advise an organisation on data protection law, monitor its compliance and act as the contact point for the supervisory authority and data subjects. The GDPR requires one in certain cases, such as public bodies and large-scale monitoring or processing of special category data.
- Decision rule Laboratories
- A rule describing how measurement uncertainty is taken into account when a laboratory states whether a result conforms to a specification or limit. For example, a rule might require the result plus its uncertainty to be fully within the limit before stating compliance.
- Deployer (AI) AI governance
- Under the EU AI Act, a person or organisation using an AI system under its authority, other than for personal non-professional activity. A company using an AI recruitment screening tool bought from a vendor is a deployer of that system.
- Design controls Medical devices
- The planned, documented controls a medical device manufacturer applies during design and development: planning, design inputs, outputs, reviews, verification, validation, transfer to production and change control. They make sure the device meets user needs and its intended use before it is released.
- Design history file (DHF) Medical devices
- A compilation of records describing the design history of a medical device, showing that it was developed according to the approved design plan. The term comes from the former US Quality System Regulation; ISO 13485, now incorporated into US FDA rules, calls this the design and development file.
- Deviation GMP
- A departure from an approved instruction, procedure, specification or standard in regulated manufacturing or testing. Each deviation is recorded promptly, assessed for its possible impact on product quality and patient safety, and investigated in proportion to its risk before any affected batch is released.
- Documented information Management systems
- Information an organisation must control and keep, together with the medium it is held on, whether paper, electronic files or a software system. It covers both the documents that describe how work should be done and the records that prove what was actually done, when and by whom.
E
- Emergency preparedness and response Health and safety
- Planning, resources and training that allow an organisation to respond effectively to emergencies such as fire, chemical spills, gas leaks, medical events or natural disasters, so that harm to people and the environment is limited. Plans are tested through drills and updated afterwards.
- Environmental aspect Environment
- An element of an organisation's activities, products or services that interacts, or can interact, with the environment. Examples include energy use, emissions to air, wastewater discharge, waste generation, raw material use and the potential for spills. Aspects are the causes; impacts are the resulting changes.
- Environmental impact Environment
- Any change to the environment, whether harmful or beneficial, that results wholly or partly from an organisation's environmental aspects. Examples include air pollution, depletion of natural resources, soil contamination, greenhouse gas effects and, on the positive side, habitat restoration. Impacts can be local, regional or global.
- Externally provided processes Quality
- Processes, products or services supplied by outside providers that affect the organisation's own output, including outsourced activities such as calibration, transport, design or IT services. The organisation stays responsible for their conformity and must decide how much control to apply.
F
- FMEA Risk and reliability
- Failure mode and effects analysis: a step-by-step team method for identifying how a product, design or process could go wrong, the effect of each failure mode on the customer, its causes and existing controls, and the actions that reduce the risk before the problem reaches production or the field.
- Food defence Food safety
- Measures to protect food from intentional contamination or tampering by people intending harm, whether from outside or inside the organisation. It starts with a threat assessment of vulnerable points, followed by controls such as access restriction, locks, seals, visitor control and staff screening.
- Food fraud Food safety
- Deliberate deception about food, ingredients or packaging for economic gain. Examples include substitution with cheaper ingredients, dilution, mislabelling of origin or species, counterfeiting and false organic claims. Food fraud can also create safety risks, for example with undeclared allergens. Fraud is distinct from food defence, where the intent is to cause harm.
- Food safety culture Food safety
- The shared values, beliefs and behaviours throughout an organisation that influence how people think and act about food safety. It is shaped by leadership, communication, training, resources and how the organisation responds when someone raises a concern or makes a mistake.
G
- Good documentation practice (GDocP) GMP and data integrity
- The rules for creating and maintaining GMP records so they are clear, accurate and trustworthy. Typical rules include recording entries at the time of the activity, using indelible ink, signing and dating, correcting errors with a single line plus the reason, and never using correction fluid or pre-filled data.
H
- HACCP plan Food safety
- The documented plan, built on hazard analysis and critical control point principles, that sets out the significant hazards for a product or process and how each is controlled. It identifies critical control points with their critical limits, monitoring, corrective actions, verification and records.
- Harmonised structure Management systems
- The common high-level structure, core text and terms that ISO uses for its management system standards. It gives standards such as ISO 9001, ISO 14001 and ISO/IEC 27001 the same main headings and shared requirements, which makes integrating several systems simpler. It was formerly known as Annex SL.
- Hazard Health and safety
- A source with the potential to cause injury or ill health. Hazards can be physical, such as moving machinery or work at height; chemical; biological; ergonomic; or psychosocial, such as excessive workload or harassment. A hazard is the source of harm; risk combines how likely and how severe the harm is.
- Hierarchy of controls Health and safety
- An order of preference for reducing health and safety risk: first eliminate the hazard, then substitute something less hazardous, then use engineering controls, then administrative controls such as procedures and training, and finally personal protective equipment. Controls higher up are more reliable.
- High-risk AI system AI governance
- Under the EU AI Act, an AI system that is a safety component of, or itself, a product needing third-party conformity assessment under listed EU product law, or one used in listed sensitive areas such as employment, education, credit scoring or essential services, unless it does not pose a significant risk.
- Human oversight AI governance
- Measures that allow people to effectively monitor an AI system while it is in use, understand its capabilities and limits, interpret its outputs, and decide not to use, override or stop it. The EU AI Act requires high-risk systems to be designed so that such oversight is possible.
I
- Impartiality Laboratories
- The presence of objectivity: conflicts of interest do not exist or are resolved so they do not adversely influence a laboratory's, inspection body's or certification body's activities. Threats can come from commercial, financial, personal or other pressures, including from ownership or customers.
- Information security incident Information security
- One or more unwanted or unexpected security events that are likely to harm the organisation's operations or threaten its information. Examples include malware infection, unauthorised access, data leakage and loss of a laptop. Incidents are reported, assessed, contained, resolved and reviewed for lessons.
- Integrated management system Management systems
- A single management system that meets the requirements of two or more standards, such as ISO 9001, ISO 14001 and ISO 45001, through shared policies, processes, risk assessment, audits and management review. Common structure and terms across ISO standards make integration practical.
- Interested party Management systems
- A person or organisation that can affect, be affected by, or believe they are affected by a decision or activity of the organisation. Examples include customers, employees, regulators, owners, suppliers, neighbours and certification bodies. The term stakeholder is often used with the same meaning.
- Internal audit Auditing
- An audit an organisation carries out on itself, or has carried out on its behalf, to check whether its management system meets its own requirements and those of the standard, and whether it is effectively implemented and maintained. Results go to management and feed improvement and the management review.
- ISMS Information security
- Information security management system: the policies, processes, roles, risk assessments, controls and continual improvement an organisation uses to protect the confidentiality, integrity and availability of information. ISO/IEC 27001 sets out the requirements for an ISMS that can be certified. It covers people, processes and technology.
K
- Key performance indicator (KPI) Quality
- A measure that shows how well a process, function or organisation is performing against an important objective. A useful KPI has a clear definition, a data source, a target, a frequency and an owner, so that trends can be seen and acted on.
L
- Lawful basis for processing Data protection
- The legal justification an organisation relies on to process personal data. Under the GDPR there are six: consent, performance of a contract, a legal obligation, protecting vital interests, a task in the public interest or official authority, and legitimate interests balanced against the person's rights.
- Least privilege Information security
- The principle that users, systems and processes should have only the access rights they need to perform their tasks, and no more. Access is granted on approval, reviewed regularly and removed promptly when a role changes or someone leaves. It applies to people and system accounts alike.
- Life cycle perspective Environment
- Considering the environmental aspects an organisation can control or influence at every stage of a product or service's life, from raw material acquisition and design through production, transport, use, end-of-life treatment and disposal. It does not require a detailed life cycle assessment.
M
- Major nonconformity Certification
- A nonconformity that affects the management system's ability to achieve its intended results. Examples include a requirement not addressed at all, or a breakdown that raises serious doubt about product conformity or legal compliance. In certification audits it normally prevents certification until it is resolved.
- Management review Management systems
- A planned meeting in which top management examines the performance of the management system at set intervals. It considers inputs such as audit results, objectives, customer feedback, risks and resources, and produces decisions on improvements, changes to the system and the resources needed.
- Measurement systems analysis (MSA) Automotive
- A set of statistical studies that evaluate how much variation a measurement system adds to measured results. Common studies include gauge repeatability and reproducibility, bias, linearity and stability. A poor measurement system can hide real problems or reject good parts.
- Measurement uncertainty Laboratories
- A value that states the range within which the true value of a measured quantity is expected to lie, with a stated level of confidence. Accredited testing and calibration laboratories must evaluate it for their methods and report it where it is relevant to the validity or use of a result.
- Method verification Laboratories
- Confirming, with objective evidence, that a laboratory can correctly perform a standard or already validated method in its own setting, with its own staff, equipment and samples, and achieve the performance the method requires. It is lighter than full validation, which establishes the performance of a new or modified method.
- Metrological traceability Laboratories
- The property of a measurement result that links it to a stated reference, usually the SI units, through an unbroken, documented chain of calibrations, each adding to the measurement uncertainty. It is what makes results comparable between laboratories and over time.
- Minimum business continuity objective (MBCO) Business continuity
- The minimum level of services or products that is acceptable for an organisation to deliver during a disruption so it can still achieve its business objectives. It defines the reduced capacity the continuity plans must deliver, such as a percentage of normal orders or priority customers only.
- Minor nonconformity Certification
- A nonconformity that does not affect the management system's ability to achieve its intended results, such as an isolated lapse in an otherwise working control. Organisations still need to correct it and address its cause, and several related minor nonconformities can together amount to a major one.
- Multi-factor authentication (MFA) Information security
- A way of confirming identity that requires two or more different types of evidence: something the user knows, such as a password; something they have, such as a phone or token; or something they are, such as a fingerprint. Stealing one factor alone is not enough to log in.
N
- NIST CSF functions Information security
- The six top-level groups of cybersecurity outcomes in the NIST Cybersecurity Framework 2.0: govern, identify, protect, detect, respond and recover. Each function is broken down into categories and subcategories that organisations use to describe their current and target security profiles.
- Nonconformity Quality
- The non-fulfilment of a requirement. The requirement can come from a standard, a customer, the law or the organisation's own procedures. In an audit, a nonconformity is written as a statement that links the requirement, the objective evidence examined and what was actually found, so the auditee can act on it.
O
- Observation Auditing
- In auditing, a note about a situation that is not yet a nonconformity but could become one if left alone, or a point the auditor wants management to watch. Some organisations and certification bodies use the term formally, others treat it like an opportunity for improvement.
- Operational prerequisite programme (OPRP) Food safety
- In ISO 22000, a control measure applied to prevent or reduce a significant food safety hazard to an acceptable level, where an action criterion and measurement or observation show it is working, but where it does not meet the conditions for a critical control point.
- Opportunity for improvement Auditing
- A suggestion recorded during an audit where the requirement is met, but performance, efficiency or effectiveness could be better. It is not a nonconformity, and the organisation decides whether to act on it, although it should consider each one and record its decision.
- Out-of-specification (OOS) result GMP
- A test result that falls outside the specifications or acceptance criteria set in a drug application, drug master file, official compendium or by the manufacturer. US FDA guidance applies the term to release and stability testing and to in-process laboratory tests outside established limits.
- Out-of-trend (OOT) result GMP
- A result that is still within specification but does not follow the expected pattern compared with previous results, for example a stability assay dropping faster than other batches. Detecting it relies on predefined statistical or trend rules. It signals a possible change that needs evaluation, even though the batch still meets its limits.
P
- PDCA cycle Management systems
- Plan, do, check, act: a repeating cycle for managing and improving processes and systems. Plan sets objectives and actions, do carries them out, check monitors and measures the results, and act takes steps to improve. All ISO management system standards are built around this cycle.
- Permit to work Health and safety
- A formal written system that authorises specific high-risk work, such as hot work, confined space entry, work at height or electrical isolation, only after hazards are assessed, precautions are in place and the people involved have signed. It controls the work from start to safe hand-back.
- Personal data Data protection
- Under the GDPR, any information relating to an identified or identifiable living person. Someone is identifiable if they can be singled out directly or indirectly, for example by a name, an ID number, location data, an online identifier or factors specific to their physical, genetic, economic, cultural or social identity.
- Personal data breach Data protection
- Under the GDPR, a security breach that leads to accidental or unlawful destruction, loss, alteration, unauthorised disclosure of, or access to, personal data. It covers more than hacking: an email sent to the wrong person or a lost unencrypted laptop can qualify.
- Phishing Information security
- A fraudulent message, usually an email, text or chat message, that pretends to come from a trusted source in order to trick people into clicking a link, opening an attachment, sharing credentials or making a payment. Targeted versions aimed at specific people are called spear phishing.
- PII Data protection
- Personally identifiable information: any information that can be used to identify the person it relates to, or that is directly or indirectly linked to that person. The term is common in ISO/IEC 27701 and US practice; European law uses personal data, which has a similar but legally defined meaning.
- Post-market surveillance Medical devices
- The activities a medical device manufacturer carries out to collect and review experience from devices already on the market, so that any need for corrective or preventive action can be identified quickly. Sources include complaints, vigilance reports, literature, registries, trend analysis and user feedback.
- PPAP Automotive
- Production part approval process: the set of evidence a supplier gives an automotive customer to show that its manufacturing process can consistently make parts meeting every design and specification requirement, at the quoted production rate, before mass production is approved. It is usually resubmitted when the part or process changes.
- Prerequisite programme (PRP) Food safety
- The basic conditions and activities needed to keep a hygienic environment throughout the food chain, such as cleaning, pest control, personal hygiene, maintenance, water quality, waste control and supplier approval. They support the HACCP plan rather than controlling specific hazards at specific steps.
- Privacy information management system (PIMS) Data protection
- A management system for protecting privacy when processing personally identifiable information. ISO/IEC 27701 sets out its requirements, covering roles as PII controller or processor, privacy risks, controls, competence, monitoring and improvement, and helps organisations show how they meet privacy laws.
- Process approach Quality
- A way of managing an organisation as a set of connected processes, each with defined inputs, outputs, owners, resources, controls and performance measures. Understanding how the processes interact lets the organisation manage the whole system to deliver consistent results, rather than managing departments in isolation.
- Process validation GMP
- Collecting and evaluating data, from process design through commercial production, to establish scientific evidence that a manufacturing process can consistently deliver quality product. US FDA guidance describes three stages: process design, process qualification and continued process verification. Validation continues for as long as the product is made.
- Proficiency testing Laboratories
- Evaluating a laboratory's performance by comparing its results with those of other laboratories on the same samples, organised by an independent provider. Results are usually scored, for example with z-scores, so the laboratory can see whether its results are acceptable.
- Protected health information (PHI) Data protection
- Under HIPAA, individually identifiable health information held or sent by a covered entity or business associate in any form, whether electronic, paper or spoken. It covers information about a person's health, care or payment for care that identifies them. Certain records, such as employment records held as an employer, are excluded.
- Provider (AI) AI governance
- Under the EU AI Act, a person or organisation that develops an AI system or general-purpose AI model, or has one developed, and places it on the market or puts it into service under its own name or trademark, whether for payment or not. Providers carry most of the Act's obligations for high-risk systems.
- Psychosocial risk Health and safety
- Risk to people's mental, physical and social wellbeing arising from how work is designed, organised and managed. Sources include excessive workload, unclear roles, lack of control, poor support, harassment, bullying, remote or isolated work, and job insecurity. ISO 45003 gives guidance on managing it.
Q
- QMSR Medical devices
- The US FDA Quality Management System Regulation for medical devices. It incorporates ISO 13485:2016 by reference and adds US-specific requirements, replacing the former Quality System Regulation. It applies to manufacturers designing, making, packaging, labelling, storing, installing or servicing finished devices for the US market.
- Qualified person (QP) GMP
- In the European Union, the individual named on a manufacturing authorisation who must certify that each batch of a medicinal product has been made and checked in line with GMP and its marketing authorisation before it can be released. The role carries personal legal responsibility.
- Quality objective Quality
- A measurable result the organisation sets out to achieve for quality, consistent with its quality policy. Each objective is set for relevant functions or levels, and planning states what will be done, the resources needed, who is responsible, when it will be completed and how results will be evaluated.
- Quality policy Quality
- A short statement of intentions and direction for quality, set by top management. It fits the organisation's purpose and context, provides a framework for setting quality objectives, and includes commitments to meet applicable requirements and to improve the quality management system.
- Quality risk management GMP
- A systematic process for assessing, controlling, communicating and reviewing risks to the quality of a medicine across its life cycle. ICH Q9 sets out the principles: the effort and documentation should match the level of risk, and decisions should be based on scientific knowledge linked to patient protection.
R
- Recertification audit Certification
- The audit that renews a certificate before the end of its validity, normally every three years for management system certification. It reviews the whole system over the certification cycle, including performance trends, to decide whether certification should continue. It may also confirm changes to scope.
- Record of processing activities Data protection
- A written register, required by the GDPR, of how an organisation processes personal data. For a controller it includes the purposes, categories of people and data, recipients, international transfers, retention periods where possible and a general description of security measures. Processors keep a similar record.
- Recovery point objective (RPO) Business continuity
- The point to which information used by an activity must be restored after a disruption, expressed as the maximum acceptable amount of data loss measured in time. An RPO of one hour means no more than the last hour's data can be lost.
- Recovery time objective (RTO) Business continuity
- The target time within which an activity, product, service or system must be resumed after a disruption, before the impact becomes unacceptable. It is set from the business impact analysis and must be shorter than the maximum tolerable period of disruption.
- Residual risk Risk and reliability
- The risk that remains after treatment, such as new controls or process changes, has been applied. Residual risk must be evaluated and formally accepted by someone with the authority to do so, or treated further if it is still above the organisation's tolerance.
- Risk assessment (health and safety) Health and safety
- The process of identifying hazards, estimating how likely and how severe the resulting harm could be, and deciding whether existing controls are adequate or more are needed. Results are recorded and reviewed when work, equipment, people or the law change, and after incidents.
- Risk management file Medical devices
- The set of records and documents produced by the risk management process for a medical device, as described in ISO 14971. It includes the risk management plan, hazard identification, risk estimation and evaluation, risk control measures, overall residual risk evaluation and production and post-production information.
- Risk owner Information security
- The person or role with the accountability and authority to manage a particular risk. The risk owner approves how the risk is treated, accepts any risk that remains, and makes sure treatment actions are carried out. Owners are usually business managers, not only IT or security staff.
- Risk register Risk and reliability
- A record of identified risks, normally showing each risk's description, cause, owner, likelihood, consequence, rating, current controls, planned treatment and review date. It gives management one place to see and prioritise risk across the organisation or a project. It is reviewed and updated regularly.
- Risk treatment plan Information security
- The plan that sets out how identified risks will be dealt with: the controls to be put in place, who is responsible, the resources needed, target dates and how success will be measured. It is approved by risk owners together with their acceptance of residual risk.
- Risk-based thinking Management systems
- The habit of considering what could go wrong, and what opportunities exist, when planning and running processes. It means action is proportionate to the risk, so more control and attention go to the processes, products and decisions where consequences are greatest, rather than being applied the same way everywhere.
- Root cause analysis Quality
- A structured search for the underlying reason a problem occurred, using methods such as the five whys, a cause-and-effect diagram or fault tree analysis. Its purpose is to find causes that, once removed, stop the problem coming back, so that action targets the cause rather than the visible symptom.
S
- Scope 1, 2 and 3 emissions Environment
- The GHG Protocol's way of grouping an organisation's greenhouse gas emissions. Scope 1 covers direct emissions from sources it owns or controls, scope 2 indirect emissions from purchased energy, and scope 3 all other indirect emissions across its value chain. ISO 14064-1 groups emissions into direct and indirect categories instead.
- Scope of the management system Management systems
- The boundaries of a management system: the sites, activities, products, services and organisational units it covers. The scope is decided by considering context, interested parties and the organisation's activities, is kept as documented information and appears on any certificate. Anything outside it is not covered.
- Second-party audit Auditing
- An audit carried out by a customer, or someone acting for a customer, on a supplier. It checks that the supplier can meet the customer's requirements, and is distinct from a first-party internal audit and a third-party audit by an independent certification body.
- Significant environmental aspect Environment
- An environmental aspect that has, or can have, a significant environmental impact according to criteria the organisation has set, such as severity, frequency, legal requirements and stakeholder concern. Significant aspects drive objectives, operational controls, training and monitoring. The criteria are documented so the evaluation can be repeated.
- SOC 2 Type 1 and Type 2 reports Information security
- Two forms of SOC 2 report issued by an independent CPA firm. A Type 1 report gives an opinion on whether controls are suitably designed at a point in time. A Type 2 report also tests whether the controls operated effectively over a period, usually several months to a year.
- Software as a medical device (SaMD) Medical devices
- Software intended for one or more medical purposes that performs those purposes without being part of a hardware medical device, such as an app that analyses images to support diagnosis. It is regulated as a medical device, and its life cycle processes are commonly managed using IEC 62304.
- Special category data Data protection
- Under the GDPR, personal data needing extra protection: data revealing racial or ethnic origin, political opinions, religious or philosophical beliefs or trade union membership, plus genetic data, biometric data used to identify someone, health data, and data about a person's sex life or sexual orientation.
- Statement of Applicability Information security
- The document in an ISO/IEC 27001 information security management system that lists the reference controls, states which are included and which are excluded, and justifies each decision. It shows how the organisation has chosen to treat its information security risks, and auditors read it first.
- Statistical process control (SPC) Automotive
- Using statistical methods, especially control charts, to monitor a process and tell the difference between normal variation and variation from a special cause. Operators react to out-of-control signals before the process produces defective output, rather than relying only on final inspection.
- Surveillance audit Certification
- A periodic audit carried out by the certification body between certification and recertification, usually once a year, to confirm that the certified management system is still maintained, effective and improving. It samples parts of the system rather than repeating the full audit.
T
- Third-party risk management Information security
- The process of identifying, assessing and controlling the risks that suppliers, service providers and other partners bring, particularly where they access systems or handle data. It covers due diligence before engagement, contract terms, ongoing monitoring and safe exit at the end of the relationship.
- Top management Management systems
- The person or group who directs and controls an organisation at the highest level. Management system standards give top management duties that cannot be handed to others, such as showing leadership and commitment, setting the policy, assigning responsibilities and making sure the system is resourced and achieves its intended results.
- Transition period Certification
- The time allowed for certified organisations to move from an old edition of a standard to the new one. During it, certification bodies audit against the new edition, and certificates to the old edition lose validity once the period ends. The period is set by the accreditation community.
- Trust services criteria Information security
- The control criteria issued by the AICPA and used in SOC 2 examinations. They are grouped into five categories: security, availability, processing integrity, confidentiality and privacy. Security is included in every SOC 2 examination, and the organisation chooses which of the others are relevant to the services it provides.
U
- Unique device identification (UDI) Medical devices
- A system for identifying medical devices through distribution and use. A UDI is a code on the label and package made of a device identifier, which identifies the model and labeller, and a production identifier, such as lot or serial number, expiry date or date of manufacture.
V
- Validation GMP and laboratories
- Confirmation, through objective evidence, that a process, method or system consistently does what it is intended to do in its real use. In laboratories it is distinct from verification, which confirms that a method works as specified in your own hands.
- Validation master plan GMP
- A high-level document describing a site's or project's overall approach to qualification and validation. It sets out policy, responsibilities, the facilities, systems, equipment, processes and methods in scope, the validation approach for each, priorities, schedules and how the validated state will be maintained.
W
- Worker participation and consultation Health and safety
- Involving non-managerial workers in health and safety decisions. Consultation means seeking their views before decisions are made; participation means involving them in the decisions themselves, for example in hazard identification, incident investigation and choosing controls. Barriers to involvement should be removed.
Learn the terms in context