Training requirements · ISO 13485
Is training mandatory under ISO 13485?
No, not as a law in itself. ISO 13485:2016 is a voluntary standard, yet certification requires everyone whose work affects quality to be competent through education, training, skills and experience, with records to prove it. In the United States the FDA’s Quality Management System Regulation has incorporated ISO 13485 by reference since 2 February 2026.
Key facts
- Current edition
- ISO 13485:2016, third edition, reviewed and confirmed by ISO in 2025
- Legal status
- Voluntary standard; certification is by independent certification bodies
- Where it has legal force
- United States: incorporated by reference in the FDA’s QMSR, effective 2 February 2026
- People covered
- Anyone whose work affects product quality, including contractors and consultants
- Basis of competence
- Education, training, skills and experience, with records kept
- Requirement area
- Human resources, within resource management
Checked against the official text on 16 November 2026
Is ISO 13485 a law?
ISO 13485:2016 is an International Standard, not legislation. ISO describes it as setting quality management system requirements for organisations that design, produce, install or service medical devices, and for suppliers and external parties that provide them with products or quality-system services. ISO does not certify organisations; independent certification bodies do.
It is, however, increasingly written into law. The US Food and Drug Administration’s Quality Management System Regulation, effective 2 February 2026, requires manufacturers subject to it to document a quality management system that complies with the applicable requirements of ISO 13485, which it incorporates by reference. For a US device manufacturer, the standard’s people requirements are now regulatory obligations enforced by the FDA. Elsewhere, ISO itself presents the standard as a way to support regulatory compliance and market access across countries, which is why many device makers adopt it even where no law names it.
What does ISO 13485 expect about competence and training?
The people requirements sit in the standard’s human resources requirement, part of resource management. The FDA, explaining why it no longer needs its own wording on personnel, describes that requirement as expecting anyone whose work affects quality to be competent on the basis of appropriate education, training, skills and experience, and notes that all of that should be carefully recorded.
The FDA’s reading also settles who is covered: internal and external personnel whose work affects product quality, full-time and part-time staff, contractors and consultants. In practice, that includes validation engineers, sterilisation contractors, complaint handlers, software developers and the people who approve supplier controls.
Compared with ISO 9001, ISO describes ISO 13485 as placing more emphasis on regulatory requirements, risk management and process validation. Training content should reflect that emphasis: people need to know the regulatory reason behind the controls they operate, not only the steps.
Which roles need the deepest ISO 13485 training?
Every role that touches the device life cycle needs a defined level of competence, but some carry more risk and attract more audit attention. Suppliers are part of the picture too: a contract steriliser or software house working to your requirements should be able to show the competence of its own people when you audit it. The roles that usually need the deepest training are:
- Design and development engineers, for design controls, design transfer and risk management across the life cycle
- Production and process engineers, for process validation, including sterilisation and software used in production
- Quality control and inspection staff, for acceptance activities and handling of nonconforming product
- Complaint handling and post-market teams, for complaint evaluation and reporting to regulatory authorities
- Supplier quality staff, for supplier evaluation and control of outsourced processes
- Internal auditors, who must understand both the standard and the regulatory requirements it is used to meet
- Top management, for their responsibilities in quality policy, management review and regulatory compliance
What training evidence do certification auditors and the FDA expect?
Whether the visit is a certification audit or an FDA inspection under the QMSR, the questions converge on records and effectiveness. Be ready to show:
- Competence requirements per role, covering education, training, skills and experience
- Training records per person, with the procedure or course, the date and the outcome
- Evidence that training was effective, using a method proportionate to the risk of the work
- Training given before staff perform a new or changed task affecting product quality
- Staff who can explain how their own work affects device safety and performance
- Records for contractors and consultants performing work that affects quality
- Competence records for internal auditors and for anyone performing special processes
How do you build an ISO 13485 training system?
Sterling’s medical device consultants apply these steps when preparing manufacturers and their suppliers for certification audits and, increasingly, for FDA inspections under the QMSR.
- Write role competence profilesFor each role, record the education, training, skills and experience needed, with extra depth for design, validation, complaints and regulatory roles.
- Assess and planCompare each person against the profile, record gaps and plan training, mentoring or supervised practice to close them.
- Train before the taskComplete and record training before people perform new or changed tasks that affect product quality.
- Check effectiveness by riskUse assessments, observed tasks or performance data, with stronger checks for higher-risk activities such as sterilisation or final release.
- Maintain and reviewTrigger retraining from procedure revisions, complaint trends and audit findings, and give top management a periodic view of training status.
How should you check that ISO 13485 training was effective?
Match the check to the risk of the work. For a receptionist logging a complaint call, a short quiz on the complaint procedure may be enough. For an operator running a validated sterilisation cycle or a technician performing final release, a supervised practical sign-off against defined criteria is far more convincing, and auditors will expect it.
Other useful evidence comes from the quality system itself. If nonconformities, complaint handling errors or deviations fall after a training intervention, record that link. If they do not, treat it as a signal that the training did not reach the cause, and say what you changed next. That closed loop is what separates an effective training process from a list of attendance sheets.
Keep the method written down. When an auditor asks how you decided an operator was competent, the answer should point to a defined method for that task, applied the same way to everyone who does it.
What changed for US manufacturers in February 2026?
Before 2 February 2026, US manufacturers followed the FDA’s former Quality System Regulation, which carried its own wording on personnel and resources. Since that date, the QMSR points to ISO 13485 for most quality system requirements, including those on human resources, and adds specific FDA provisions where needed.
For training, the practical effect is that one set of competence records can now serve both the FDA and a certification body. The FDA itself noted, when it adopted the rule, that aligning the requirements would let internal training cover a single, harmonised set. Manufacturers that kept separate training matrices for the old regulation and for certification should consolidate them, and make sure the evidence of effectiveness meets the stronger of the two expectations.
How does Sterling Academy help medical device organisations meet ISO 13485 training needs?
Quality teams that once flew staff to public courses can now train them where they work. Sterling Academy’s ISO 13485 programme is delivered online for self-paced study, but it carries the same content and format as Sterling’s classroom training, whose certificates are trusted and accepted by all major certification bodies, and it was developed by industry experts, domain specialist trainers and globally renowned auditors with 30+ years in ISO and GRC. They cover ISO 13485:2016, the current edition, and every course ends in an assessment designed on the principles of ISO/IEC 17024:2026, which gives you a documented effectiveness check for each learner.
A typical programme combines ISO 13485 awareness for all staff, implementation training for quality and regulatory teams, ISO 14971:2019 risk management for design and risk owners, US FDA QMSR training for teams supplying the US market, and internal auditor training. Each certificate is verifiable through a QR code, and each learner has 12 months’ access.
Is ISO 13485 mandatory?
ISO 13485 is voluntary as a standard. In the United States it is effectively mandatory for manufacturers under the FDA’s QMSR, which incorporates it by reference, and many markets and customers expect certification.
Does ISO 13485 require training records?
The FDA’s explanation of the requirement says the education, training, skills and experience of people whose work affects quality should be carefully recorded. Certification auditors ask for the same evidence.
Do contractors need ISO 13485 training?
If their work affects product quality, yes. The FDA’s reading of the requirement covers external personnel, part-time staff, contractors and consultants.
Is ISO 13485:2016 still the current edition?
Yes. ISO lists it as the current edition, last reviewed and confirmed in 2025.
Should training cover regulatory requirements as well as procedures?
Yes. ISO describes ISO 13485 as placing more emphasis on regulatory requirements than ISO 9001, so staff should understand the regulatory reason behind the controls they operate, not only the steps.
Can Sterling certify our company to ISO 13485?
No. Certification is carried out by an independent certification body. Sterling prepares your people and your quality system for that audit.
Does internal auditor training qualify someone to audit for a certification body?
No. It prepares staff to audit their own organisation’s quality system, not to audit for a certification body.
Sources
- ISO 13485:2016 Medical devices — Quality management systems — Requirements for regulatory purposes (Edition 3, March 2016; confirmed 2025): standard page and abstract · International Organization for Standardization (ISO) · checked 16 November 2026
- ISO 13485:2016 publisher’s sample: table of contents (6.2 Human resources under Clause 6 Resource management) · ISO, sample distributed by iTeh Standards · checked 16 November 2026
- 21 CFR Part 820 Quality Management System Regulation: § 820.7 (incorporation by reference of ISO 13485:2016) and § 820.10 (requirements for a quality management system) · US Food and Drug Administration, Electronic Code of Federal Regulations · checked 16 November 2026
- Quality Management System Regulation (QMSR): effective 2 February 2026 · US Food and Drug Administration · checked 16 November 2026
- Medical Devices; Quality System Regulation Amendments, final rule, 89 FR 7496 (2 February 2024): FDA response on Clause 6.2 of ISO 13485 (competence and records) and on harmonised training · US Food and Drug Administration, Federal Register (govinfo) · checked 16 November 2026
- Certification: “ISO does not perform certification or issue certificates” · International Organization for Standardization (ISO) · checked 16 November 2026
Prepared by the Sterling expert panel · Last updated 16 November 2026 · How our courses are made · This page is general information, not legal advice.
Training your team?