Training requirements · EU MDR
Is training mandatory under the EU Medical Devices Regulation (MDR)?
Yes, for key roles and through the quality system. The EU MDR sets minimum qualifications for the person responsible for regulatory compliance and requires manufacturers to run a quality management system that covers resource management. It prescribes no general staff course, but notified bodies examine personnel qualification records, so documented training is how manufacturers prove competence.
Key facts
- Law
- Regulation (EU) 2017/745 on medical devices, applicable since 26 May 2021
- Named role with set qualifications
- Person responsible for regulatory compliance (PRRC), at manufacturers and authorised representatives
- Wider people duty
- A quality management system covering responsibilities, resources and management of the organisation
- Checked by
- Notified bodies during audits; national competent authorities during market surveillance
- Training records looked at
- Notified bodies may examine records on the qualifications of personnel
- Course or certificate prescribed
- None for general staff
Checked against the official text on 16 November 2026
Who do the MDR training and qualification duties apply to?
The duties fall mainly on manufacturers placing medical devices on the EU market, wherever they are based, and on the authorised representatives that non-EU manufacturers must appoint. Importers and distributors that relabel devices under their own name or modify them can take on the manufacturer’s obligations, and with them the same expectations about qualified people.
Every manufacturer must have at least one person responsible for regulatory compliance available within its organisation. Micro and small enterprises may instead have that person permanently and continuously at their disposal, for example through a service contract. An authorised representative must also have such a person permanently and continuously available, with expertise in the EU regulatory requirements for medical devices.
Beyond that one role, the quality management system applies to everyone whose work affects device quality and compliance: design engineers, production operators, quality control staff, complaint handlers, post-market surveillance teams and the people who keep the technical documentation up to date.
What qualifications does the person responsible for regulatory compliance need?
The MDR is unusually precise here. The person must show expertise in medical devices through one of two routes: a university degree, or a course of study a Member State recognises as equivalent, in law, medicine, pharmacy, engineering or another relevant scientific discipline, plus at least one year of professional experience in regulatory affairs or quality management systems for medical devices; or four years of professional experience in those fields. Manufacturers of custom-made devices may rely instead on at least two years of experience in a relevant field of manufacturing, subject to national rules on professional qualifications.
The role carries named responsibilities: checking device conformity before release, keeping the technical documentation and EU declaration of conformity current, meeting post-market surveillance and vigilance reporting obligations, and issuing the required statement for investigational devices. Where several people share the role, their areas must be set out in writing, and the person must suffer no disadvantage for doing the job properly.
Training alone cannot replace the degree or experience the Regulation demands, but it is how a qualified person keeps current with guidance, common specifications and the manufacturer’s own system, and it is often the gap a notified body probes.
What should MDR training cover for the rest of the organisation?
The Regulation’s quality management system must address, among other things, a strategy for regulatory compliance, management responsibility, resource management, risk management, clinical evaluation, product realisation, post-market surveillance, vigilance and corrective action. Each of those areas needs people who know what the MDR expects of them. A practical curriculum, set by role, usually includes:
- For all staff: what the MDR is, the device classes the company makes, and how their own work affects safety and conformity
- For design and development: the general safety and performance requirements, risk management across the life cycle, and design change control
- For production and quality control: release checks, traceability and unique device identification, handling of nonconforming product
- For complaints, post-market surveillance and vigilance teams: what counts as a serious incident, reporting routes and timelines set by the procedures, trend reporting
- For regulatory affairs and the PRRC: technical documentation, conformity assessment routes, EUDAMED registration and updates to guidance
- For internal auditors: auditing the quality management system against the MDR and the manufacturer’s chosen standard
Does the MDR mention training anywhere else?
Yes, in two places that catch manufacturers out. First, for clinical investigations, personnel taking part must be adequately instructed and trained in the proper use of the investigational device, the clinical investigation plan and good clinical practice, and the sponsor must verify, arrange where necessary and document that training.
Second, the instructions for use must state any requirement for special training or particular qualifications of the device user and other persons. If a device needs a trained user, the manufacturer has to say so, and many then provide or arrange that user training as part of supply.
What happens if training and qualification records are missing?
A missing or unqualified PRRC is a direct breach of a named obligation, and notified bodies check it early. Gaps in staff training records are usually raised as nonconformities against the quality management system, and the manufacturer then has to show corrective action within the time the notified body sets before certification can be granted or kept.
The commercial risk is larger than the finding itself. Devices in the higher risk classes need a notified body’s conformity assessment before they are placed on the market, so a suspended or refused certificate stops sales, and national competent authorities can take action on non-compliant devices. Penalties for infringements are laid down by each Member State, so the exposure differs from country to country.
What evidence does a notified body or competent authority ask for?
Notified bodies audit the quality management system before certification and at least once every twelve months afterwards. The documentation they assess includes the organisational structure with staff responsibilities for critical procedures, and in surveillance they may examine records on the qualifications of the personnel concerned. The requests a manufacturer should be ready for are:
- The PRRC’s diploma or certificate and a record of relevant professional experience, or the service contract for an external PRRC
- A written split of responsibilities where more than one person shares the PRRC role
- An organisation chart and job descriptions linked to critical procedures
- A competence or training matrix by role, with the training each person has completed and when
- Records of training on new or revised procedures before staff apply them
- For clinical investigations, the sponsor’s documented training of investigators and site staff
How do you build an MDR training programme that holds up at audit?
A programme that works is tied to the quality management system rather than run as a stand-alone event. A practical sequence for a device manufacturer looks like this.
- Confirm the PRRCCheck that the named person meets one of the qualification routes and that the evidence is on file; for a micro or small enterprise, confirm the contract gives permanent and continuous access.
- Map roles to MDR dutiesList every role touching design, production, release, complaints, vigilance and documentation, and record the MDR knowledge each one needs.
- Close the gapsAssign awareness training to all, and deeper training to regulatory, quality, design and post-market roles; use on-the-job instruction for procedures.
- Record and checkKeep per-person records, and check understanding with an assessment or a supervised task, not only attendance.
- Refresh on changeRetrain when procedures, guidance, common specifications or the product range change, and review the matrix at management review.
How does Sterling Academy support MDR competence?
Device teams rarely have time for a week in a classroom, so Sterling Academy delivers its medical device training online, at each learner’s pace, using the same content and format as Sterling’s classroom training and material built by industry experts, domain specialist trainers and globally renowned auditors with 30+ years in ISO and GRC. Each course ends in an assessment designed on the principles of ISO/IEC 17024:2026 and a verifiable certificate with a QR code that a notified body auditor can check.
A typical plan pairs EU MDR awareness for staff whose work affects conformity with ISO 13485:2016 and ISO 14971:2019 training for quality, design and risk owners, and internal auditor training for the audit team. Each learner has 12 months’ access, and the client administrator sees every person’s progress and result, which feeds the training records the quality management system needs. The courses below are live and can be bought for one person or a team.
Does the EU MDR require a certificate for staff training?
No. The MDR sets qualification routes for the person responsible for regulatory compliance but prescribes no certificate for general staff training. Certificates from assessed courses are still useful evidence in the training record.
Can an external consultant act as the PRRC?
Micro and small enterprises may have the person permanently and continuously at their disposal rather than employed in-house. Larger manufacturers must have the person available within their organisation.
Does a non-EU manufacturer need a PRRC?
The manufacturer itself must meet the requirement, and its authorised representative in the EU must also have a person responsible for regulatory compliance permanently and continuously available.
Is ISO 13485 training required by the MDR?
The MDR does not name ISO 13485 training. Many manufacturers build their quality management system on ISO 13485:2016, and in that case staff need training on the procedures that system contains.
Who enforces the MDR?
Notified bodies assess conformity and audit quality management systems; national competent authorities carry out market surveillance. Penalties are set by each Member State.
How often should MDR training be refreshed?
The Regulation sets no interval. Refresh it when procedures, guidance or products change, after audit findings, and on a planned cycle you define in the quality management system.
Sources
Prepared by the Sterling expert panel · Last updated 16 November 2026 · How our courses are made · This page is general information, not legal advice.
Training your team?